* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
DSSERVO DS3225 25KG Metal Gear High Torque Waterproof Digital Servo For RC Airplane Robot
The DSSERVO DS3225 25KG digital servo features HV high torque, metal gear, fast heat dissipation, sensitivity and responsiveness. With high quality and performance, it is tailored for RC hobbyist to provide different experience and delight.
Features:
- Large torque - maximum torque can up to 25kg.cm (6.8V)
- High-precision metal gear with hard anodizing for better accuracy and longer service life
- CNC aluminium middle shell enhances heat dissipation and ensures the servo motor can work well
- Water proof rubber seals screws, made of first-grade material ensure the longevity of the products
- Good performance digital standard servo, which can be a common use for robots, mechanical arms, climbing cars and remote control toys
- Great choice for university professors and students who are interested in developing software for robot parts
- Tailored for RC hobbyist to provide different experience and delight
Specifications:
Brand: DSSERVO
Item: DSSERVO DS3225 Digital Servo
Operating voltage: 4.8 - 6.8V
Operating speed ( 5.0V ): 0.15 sec/60 degree
Operating speed ( 6.8V ): 0.13 sec/60 degree
Stall torque ( 5.0V ): 21kg/cm
Stall torque ( 6.8V ): 25kg/cm
Dead band: 3μs
Working frequency: 50-333Hz
Connector wire: About 300mm
Gear type: Metal
Motor Type: DC motor
Size: 40 * 20 * 40.5mm
Weight: 67g
Note: There could be some deviations due to manual measurement or slight color difference as the result of shooting scene
A well built and solid servo. I tested it with a signal generator and oscilloscope and it works perfectly up to 330 Hz, with pulse widths nominally between 500 and 2500 (neutral 1500) microseconds; which is essentially independent of the repetition rate. Moreover, a 50 microsecond overrange is allowed, and so the effective range is 450 to 2550 microseconds. Idle current is nearly zero.
A well built and solid servo. I tested it with a signal generator and oscilloscope and it works perfectly up to 330 Hz, with pulse widths nominally between 500 and 2500 (neutral 1500) microseconds; which is essentially independent of the repetition rate. Moreover, a 50 microsecond overrange is allowed, and so the effective range is 450 to 2550 microseconds. Idle current is nearly zero.
A well built and solid servo. I tested it with a signal generator and oscilloscope and it works perfectly up to 330 Hz, with pulse widths nominally between 500 and 2500 (neutral 1500) microseconds; which is essentially independent of the repetition rate. Moreover, a 50 microsecond overrange is allowed, and so the effective range is 450 to 2550 microseconds. Idle current is nearly zero.
Αυτό το servo είναι κτήνος. ανασηκώνει όλο το αμάξωμα , έχοντας το όχημα ( 1/8 ) με το πλάι, πολύ εύκολα σε σύγκριση άλλα servo μου. Φαίνεται αρκετά ποιοτικό . Ο χρόνος θα δείξει ! ! !
Αυτό το servo είναι κτήνος. ανασηκώνει όλο το αμάξωμα , έχοντας το όχημα ( 1/8 ) με το πλάι, πολύ εύκολα σε σύγκριση άλλα servo μου. Φαίνεται αρκετά ποιοτικό . Ο χρόνος θα δείξει ! ! !
Αυτό το servo είναι κτήνος. ανασηκώνει όλο το αμάξωμα , έχοντας το όχημα ( 1/8 ) με το πλάι, πολύ εύκολα σε σύγκριση άλλα servo μου. Φαίνεται αρκετά ποιοτικό . Ο χρόνος θα δείξει ! ! !
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
While it’s not really waterproof it’s easy to do. I waterproof every servo, receiver, esc as well as other electronics like multi meter that I may use outdoors with Silicone Conformal Compound. Just remove the 4 screws on servo, pull on the bottom &either dip it or brush both sides with the Conformal compound, let it dry and screw it back together. It goes on clear & u can use 1 or more coats. I highly recommend silicone conformal over acrylic. The acrylic works as well but can flake if scratched. No such worries with the silicone conformal compound as it remains flexible. It’s what all the electronic oem manufacturers use to waterproof there electronics
While it’s not really waterproof it’s easy to do. I waterproof every servo, receiver, esc as well as other electronics like multi meter that I may use outdoors with Silicone Conformal Compound. Just remove the 4 screws on servo, pull on the bottom &either dip it or brush both sides with the Conformal compound, let it dry and screw it back together. It goes on clear & u can use 1 or more coats. I highly recommend silicone conformal over acrylic. The acrylic works as well but can flake if scratched. No such worries with the silicone conformal compound as it remains flexible. It’s what all the electronic oem manufacturers use to waterproof there electronics
będzie działać perfekcyjnie. polecam do tego modelu bo ma duże ciężkie koła i długie drążki kierownicze dlatego jak najbardziej się sprawdzi. pamiętaj ustawić poprawnie punkt końcowy żeby nie zamęczyć serwa ze względu na to że to serwo 180 st a oryginalne ma 90.
It'll work perfectly. I would recommend for this model because it has large heavy wheels and long steering bars so it will work as well as possible. Remember to set the end point correctly so as not to overwhelm the serve because it is 180 st and the original is 90.
If, the original servo is a standard servo then this servo will fit. The output shaft has 25 teeth, unfortunately I do not know how many teeth the servo saver of your vehicle has.
Ifthe original servo is a standard servo then this servo will fit. The output shaft has 25 teeth, unfortunately I do not know how many teeth the servo saver of your vehicle has.
Answered by BG353944189 on 03/10/2023Helpful (0)
0
Q:
Will this work with the Dumborc x6 w/x6F for JJRC Q65?
Will this work with the Dumborc x6 w/x6F for JJRC Q65?
Ja.
Servo hat Standard Größe, und Passt bei den meisten 1:10 Modelen Problemlos.
Habe dieses Servo in mehreren Autos verbaut, und bin zufrieden damit. Noch keine defekte, trotz harter Nuzung.
Yeah
Servo is standard size, and fits with most 1:10 models without problems.
Have installed this servo in several cars, and am satisfied with it. Still no defective, despite hard use.
Answered by derschwarzemichel on 17/07/2021Helpful (0)
i have had mine submerged plenty of times and have had no problems. But do open the servo to double check all O-rings and silicon grease all joints as a precaution.
i have had mine submerged plenty of times and have had no problems. But do open the servo to double check all O-rings and silicon grease all joints as a precaution.
Answered by BertyvN on 17/05/2022Helpful (0)
0
Q:
Is there a physical limit? I've purchased some of them and I can turn at least 3 times 360°.
Is there a physical limit? I've purchased some of them and I can turn at least 3 times 360°.
NO there's no physical limiter but the electronics limits the movement to 0-200deg.(usually the servos move 0-180deg). I toasted the electronics on one of my. I took away the electronics and now it works like a ordinary DC-motor (with a gearbox, of course)
NO there's no physical limiter but the electronics limits the movement to 0-200deg.(usually the servos move 0-180deg). I toasted the electronics on one of my. I took away the electronics and now it works like a ordinary DC-motor (with a gearbox, of course)
Answered by KIRASE on 17/01/2020Helpful (0)
0
Q:
will Traxxas TSM work with these servos? are they digital?
will Traxxas TSM work with these servos? are they digital?