Direct purchase from the factory 
1.You can contact the customer service. for any question regarding the product.
2.Ask the question in English to get answer faster.
3.Keep your question short and to the point.
Questions:0/2000
ENJOYWOOD アルミ合金 木工 MFT テーブルホールドダウンクランプ 木工デスクトッププレッサー クイックマニュアルプレスプレート用 木工機械アクセサリー DIYクランプ
1268
Shipping to: United States |
Express delivery: 7-12 business days |
Standard delivery: 15-25 business days
安全なチェックアウト
無料ギフト
配送ポリシー
返品ポリシー無料ギフト
Roymallへようこそ、プレミアムデパートメントストアギフトを購入するための専門ウェブサイトです。私たちはあなたのサポートを高く評価し、感謝の気持ちを込めて、購入ごとに特別な無料ギフトをお届けします。私たちと一緒にショッピングを楽しむことで、ライフスタイルを向上させる高品質な製品を楽しむだけでなく、注文ごとに特別な無料ギフトも受け取ることができます。 私たちのコレクションを探索して、完璧なギフトを見つける準備はできましたか？プレミアムデパートメントストアアイテムのセレクションを閲覧し、注文をして、購入品と一緒に無料ギフトが届くのを楽しみにしてください。配送ポリシー
注文を受領後、商品を安全にお届けするために努めます。配送詳細は確認メールに記載されます。ほとんどの場合、注文は2日以内に処理されます。特別な状況下では、以下のように遅れることがあります：土曜日、日曜日、または祝日に注文をした場合、2日遅れます。通常、飛行機の遅延やその他の環境要因の影響を受けない場合、5〜7営業日（月曜日から金曜日）かかります。私たちの配送サービスは世界中に及ぶため、配送時間はあなたの場所によって異なります。遠隔地や国の場合は数日かかる場合がありますので、お待ちください。1. 返品・交換ポリシー
私たちはroymall.comで購入した商品のみ受け付けます。地元のディストリビューターや他の小売店で購入した商品は返品できません。 最終販売商品や無料ギフトは返品できません。返品の対象となるためには、商品は未使用で受け取ったときと同じ状態でなければなりません。また、元のパッケージに入っている必要があります。返品手順を受け取った後、返品商品をパッケージに詰めて地元の郵便局または別の宅配業者に渡してください。返品または交換商品を受け取った後、3〜5営業日以内に処理します。返金は自動的に元の支払い方法に反映されます。カスタムサイズ、カスタムカラー、カスタムプリントなどのカスタム製品は返品または交換できません。さらにヘルプが必要な場合は、お問い合わせください。 service@roymall.com またはWhatsapp: +447549870296
2.返金ポリシー
返品パッケージを受け取り、確認した後、全額返金または100％ストアクレジットを受け取ります。返金は自動的に元の支払い方法に反映されます。 配送料や関税、手数料は返金対象外です。パッケージが発送された後、追加の配送料は返金できません。これらの費用を支払う責任があり、私たちはそれらを免除または返金することはできません。返品商品を受け取り、確認した後、返品商品を受け取ったことを通知するメールを送信します。また、返金の承認または拒否についても通知します。返金プロセスに関する問題がある場合は、お問い合わせください。 service@roymall.com またはWhatsapp: +447549870296
Description:
Aluminum Alloy Woodworking MFT Table Hold Down Clamp Woodworking Desktop Presser Dare for Quick Manual Pressing Plate Woodworking Machinery Accessories DIY Clamps
| Material | Aluminum alloy + Stainless steel |
| Size | 100*30*110mm |
| Maximum clamping | 60mm |
| Specifications | Diameter 3/4 Inch / Diameter 20mm |
| Application | Woodworking desktop auxiliary clamping |
Features:
1.Desktop fast press fixture, no damage to the target, simple operation
2.Two specifications are available to meet a variety of needs
3.High, middle and low three gears can be adjusted, different clamping forces are suitable for different working conditions
Tips:
19mm-CN: 19mm clamp ships from China Warehouse
20mm-CN: 20mm clamp ships from China Warehouse
20mm-CZ: 20mm clamp ships from Czech Warehouse
Package Included:
1X Woodworking Hold Down Clamp
More details:
Products related to this item
Loading related products...
❮
❯
Videos for similar product
Loading product videos...
❮
❯
Tools, Industrial & Scientific Ranking
Customer Reviews
- All Reviews (1180)
- Image ( 2 )
- Video (0)
Sort by:
Reviews only from your country (United States)
|
Show Original
A part of the review has been auto-translated.
-
09/01/2022
I have purchased two of these clamps and received them before the estimated delivery date. The packaging is substantial and the clamps arrived undamaged.
The clamps are well made and work as expected. They are a new twist on an old idea, the Holdfast which woodworkers have been using for a very long time, see photo.
When using the clamp, to get full clamping pressure the clamp must be pushed down hard on the work piece with the cam lever in the reset position. If this is not done the cam has to take up any gap before exerting pressure on the work piece.
When the cam exerts pressure on the work piece it causes the knurled shaft in the dog hole to press against the sides of the dog hole. This pressure is only at the top and bottom of the dog hole as the cam tries to rotate the clamp within the dog hole. The knurled shaft does not need to be knurled all the way round as it only bears on the dog hole where it is in line with the clamp arm. If the knurling was only where needed it would make fitting the clamp in the dog hole easier. If the clamp will damage the dog holes over extended use, only time will tell.Comments (1)Show Original -
-
02/12/2021
This clamps are very well made and nice to handle.
Proud owner of this quality product.
Thanks Dennis from Hooked On Wood for his recommendation.Comments (0)Show Original -
Customer Q&As
Searching for relevant results...
Can't find your answer?
Ask a new questionorCustomer Service
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-13 of 13
|
Show Original
A part of the QA has been auto-translated.
-
0A:85mmAnswered by BeppeC on 12/05/2023Helpful (0)
-
0A:No, one piece only.Answered by Zerrenner on 20/11/2021Helpful (0)
-
0A:Buy the 20mm diameter, the same size of the holes on your workbench.Answered by Zerrenner on 20/11/2021Helpful (0)
-
0A:Notat all! Both the 19mm (3-4") and 20mm clamp stems are marginally undersized so they don't even fit all that tightly in their respective size dogholes. 25mm holes require a far more precise fit than these dogs could possibly achieve.Answered by Downunderdogg on 19/05/2025Helpful (0)
-
0A:HiTo answer your question the clamp is designed for MFT style benches which have a top made of MDF and is usually 18mm thick. The clamp works by being forced against the sides of the dog hole by the downward force exerted on the work piece. Because the hole is only 18mm deep and MDF is relatively soft a plain shaft would not have enough friction and would slip in the hole. The original carpenters hold fast had a plain shaft but usually was fitted into a hole 50 mm deep in a bench made from a hard timber. To answer the second part of your question, yes the textured shaft will cause some wear to the dog hole. This will occur at the top and bottom edges of the dog hole as the clamp is forced against the sides of the hole. Inserting and removing the clamp will also cause some wear as the shaft acts as a reamer. This will probably not be too detrimental to the operation of the dog hole. Hope this explains how these clamps work and why they are made this way.Answered by BG492552502 on 27/01/2022Helpful (0)
-
0A:mine fit with quite a bit of force but they're functional so I'm not complaining.Answered by BG171750733 on 17/03/2022Helpful (0)
-
0A:Old saying, "wish in one hand, and _ _ _ _ in the other. Which one will fill first".Answered by Hawkeye on 28/10/2021Helpful (0)
-
0A:It depends on local custom law.Answered by The seller on 26/12/2023Helpful (0)
-
0A:Maybe your workbench is too thin and the 20mm hole is large.Answered by Spartan0 on 05/05/2022Helpful (0)
-
0A:Something about 3500 Pakistani Rupee.Answered by Zerrenner on 20/11/2021Helpful (0)
-
0A:No answer yet.
-
0A:Aluminum is the chemical element of atomic number 13, a light silvery-gray metal. The form aluminum is in common use in the United States; the form aluminium is used in Great Britain and by some chemists in the United States.Answered by BG401344532 on 04/01/2022Helpful (0)
-
0A:mft system from 20 mmmAnswered by BG133657225 on 09/02/2023Helpful (0)
0 Liked カートに追加されました- ブリッジシティツールワークス HG-4 ホーニングガイド 調整可能固定角度 高精度シャープナー かんな刃 木工用ノミ用
- 3142
- $334.99/ $439.190
0 Liked カートに追加されました- Wnew ストラットワークテーブル アルミ合金 ポータブルワークソーホースサポート クイック伸縮ワークベンチ 木工ツール
- 3195
- $207.99/ $561.190
0 Liked カートに追加されました- 木工用電動木材ルーターリフトシステム、ルーターインサートプレート付き、彫刻とトリミング用、調整可能なDIYワークベンチ
- 3629
- $147.99/ $365.990
