Roymall Newsletter Subscription Form
Take 20% off your order now - Get early access to deals and sales
Home>mall>Electronics
0いいね

Geekcreit® DIY L298N 2WD 超音波スマートトラッキングモーターロボットカーキット(Arduino用) - 公式Arduinoボードで動作する製品

5.0749
$20.99 /$25.61
  • *Name:

  • *Email:

  • *Phone:

  • *Quantity:

  • *Content:

  • Attachment:

    Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

$19.99 /$25.61
Shipping to: United States | Express delivery: 7-12 business days | Standard delivery: 15-25 business days

安全なチェックアウト

無料ギフト
購入ごとに無料ギフト
配送ポリシー
9.9ドル以上の注文で標準配送無料
返品ポリシー
返品は商品受領日から40日以内に受け付けます。カスタマイズ商品は返品または交換できません。Eギフトカードで購入した商品は交換のみ可能で、返金は適用されません。

無料ギフト

Roymallへようこそ、プレミアムデパートメントストアギフトを購入するための専門ウェブサイトです。私たちはあなたのサポートを高く評価し、感謝の気持ちを込めて、購入ごとに特別な無料ギフトをお届けします。私たちと一緒にショッピングを楽しむことで、ライフスタイルを向上させる高品質な製品を楽しむだけでなく、注文ごとに特別な無料ギフトも受け取ることができます。 私たちのコレクションを探索して、完璧なギフトを見つける準備はできましたか?プレミアムデパートメントストアアイテムのセレクションを閲覧し、注文をして、購入品と一緒に無料ギフトが届くのを楽しみにしてください。

配送ポリシー

注文を受領後、商品を安全にお届けするために努めます。配送詳細は確認メールに記載されます。ほとんどの場合、注文は2日以内に処理されます。特別な状況下では、以下のように遅れることがあります:土曜日、日曜日、または祝日に注文をした場合、2日遅れます。通常、飛行機の遅延やその他の環境要因の影響を受けない場合、5〜7営業日(月曜日から金曜日)かかります。私たちの配送サービスは世界中に及ぶため、配送時間はあなたの場所によって異なります。遠隔地や国の場合は数日かかる場合がありますので、お待ちください。

1. 返品・交換ポリシー

私たちはroymall.comで購入した商品のみ受け付けます。地元のディストリビューターや他の小売店で購入した商品は返品できません。 最終販売商品や無料ギフトは返品できません。返品の対象となるためには、商品は未使用で受け取ったときと同じ状態でなければなりません。また、元のパッケージに入っている必要があります。返品手順を受け取った後、返品商品をパッケージに詰めて地元の郵便局または別の宅配業者に渡してください。
返品または交換商品を受け取った後、3〜5営業日以内に処理します。返金は自動的に元の支払い方法に反映されます。カスタムサイズ、カスタムカラー、カスタムプリントなどのカスタム製品は返品または交換できません。さらにヘルプが必要な場合は、お問い合わせください。 service@roymall.com またはWhatsapp: +447549870296

2.返金ポリシー

返品パッケージを受け取り、確認した後、全額返金または100%ストアクレジットを受け取ります。返金は自動的に元の支払い方法に反映されます。 配送料や関税、手数料は返金対象外です。パッケージが発送された後、追加の配送料は返金できません。これらの費用を支払う責任があり、私たちはそれらを免除または返金することはできません。返品商品を受け取り、確認した後、返品商品を受け取ったことを通知するメールを送信します。また、返金の承認または拒否についても通知します。返金プロセスに関する問題がある場合は、お問い合わせください。 service@roymall.com またはWhatsapp: +447549870296
Features:

1. Simple mechanical structure, installation is very easy.
2. With L298N control module, four monitoring modules and 51 control units.
3. The battery box can hold four batteries, convenient for the entire power system.


Reference Manual: click to download

Note:
-Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.

Package included:
1 x Car chassis
2 x Car wheels
4 x Fasteners (high intensity black acrylic)
1 x Caster
1 x Battery box(without battery)
1 x A quality Rocker Switch
1 x V5 shield
1 x UNOR3
1 x SG90
1 x FPV
1 x L298N
1 x USB Cable

Ultrasonic module circuit diagram
Electronics Ranking
Geekcreit® DIY L298N 2WD 超音波スマートトラッキングモーターロボットカーキット(Arduino用) - 公式Arduinoボードで動作する製品

L298N_Motor Drive Module
Geekcreit® DIY L298N 2WD 超音波スマートトラッキングモーターロボットカーキット(Arduino用) - 公式Arduinoボードで動作する製品
Geekcreit® DIY L298N 2WD 超音波スマートトラッキングモーターロボットカーキット(Arduino用) - 公式Arduinoボードで動作する製品
Geekcreit® DIY L298N 2WD 超音波スマートトラッキングモーターロボットカーキット(Arduino用) - 公式Arduinoボードで動作する製品
Geekcreit® DIY L298N 2WD 超音波スマートトラッキングモーターロボットカーキット(Arduino用) - 公式Arduinoボードで動作する製品,Geekcreit® DIY L298N 2WD 超音波スマートトラッキングモーターロボットカーキット(Arduino用) - 公式Arduinoボードで動作する製品,Geekcreit® DIY L298N 2WD 超音波スマートトラッキングモーターロボットカーキット(Arduino用) - 公式Arduinoボードで動作する製品

Customer Reviews

4.80 out of 5
See all 516 reviews
Write a Review
  • All Reviews (516)
  • Image ( 2 )
  • Video (0)
  • All Star
    • All Star(516)
    • 5 Star (2)
    • 4 Star (0)
    • 3 Star (0)
    • 2 Star (0)
    • 1 Star (0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 28/09/2020

    This is an interesting kit, but it is incomplete and some parts are incorrect. The chassis is cut for a different project, and does not have the correct mounting points for the controller board or the sensor, so additional drilling is required. The instructions are incomplete - for instance there is no reference at all to the sensor assembly, which is quite complex. There is no wiring diagram, so a good knowledge of Arduino add-ons and power supply arrangement is required. There are 4 stand offs supplied, but there should be 12. Some soldering is required, as well as additional tools. Dupont connectors are not included.
    On the plus side, the sensor mount is actually a tilt-and pan mount for a camera, and can be upgraded with some readily-available extras. The castor has ball bearings. The sensor shield includes headers for a number of additional components, including a LCD display, SD card and Bluetooth (but note that the Arduino might not support all functions simultaneously).
    The encoder wheels are provided, but to get feedback on the number of steps for each wheel (for instance, to ensure straight-line tracking) you will need to add the opto sensors and create the required code. There are cutouts on the board for mounting the sensors.
    This is a simple robot that is a good basis for Arduino-based robot control, but be prepared to deal with the problems mentioned above.

    Comments (1)
    Show Original
  • 15/04/2019

    Fun to build and works great. I built this kit as a working obstacle-avoidance robot car. Provided my own wires, standoffs, and some additional hardware. Also had to drill some additional mounting holes. I switched to using five AA batteries to get better voltage regulation.

    Comments (0)
    Show Original
Show:
    12...30

    Total 0 pages

    Go to page

    Go
    Customer Q&As
    Can't find your answer? Ask a new questionorCustomer Service

    Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.

    showing 1-30 of 30 |
    Show Original

    A part of the QA has been auto-translated.

    マイカート カート (4831)
    マイお気に入り マイお気に入り (0)

    Roymall Service