EdenFantasys Newsletter Subscription Form
Take 20% off your order now - Get early access to deals and sales
Home>mall>Electronics
0いいね

Geekcreit? FT232RL FTDI USB - TTLシリアル変換アダプタモジュール Geekcreit for Arduinno - 公式Arduinnoボードで動作する製品

4.3377
¥302.42 / ¥369.29
  • *Name:

  • *Email:

  • *Phone:

  • *Quantity:

  • *Content:

  • Attachment:

    Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

¥151.97 / ¥369.29
Shipping to: United States | Express delivery: 7-12 business days | Standard delivery: 15-25 business days

安全なチェックアウト

無料ギフト
購入ごとに無料ギフト
配送ポリシー
9.9ドル以上の注文で標準配送無料
返品ポリシー
返品は商品受領日から40日以内に受け付けます。カスタマイズ商品は返品または交換できません。Eギフトカードで購入した商品は交換のみ可能で、返金は適用されません。

無料ギフト

Roymallへようこそ、プレミアムデパートメントストアギフトを購入するための専門ウェブサイトです。私たちはあなたのサポートを高く評価し、感謝の気持ちを込めて、購入ごとに特別な無料ギフトをお届けします。私たちと一緒にショッピングを楽しむことで、ライフスタイルを向上させる高品質な製品を楽しむだけでなく、注文ごとに特別な無料ギフトも受け取ることができます。 私たちのコレクションを探索して、完璧なギフトを見つける準備はできましたか?プレミアムデパートメントストアアイテムのセレクションを閲覧し、注文をして、購入品と一緒に無料ギフトが届くのを楽しみにしてください。

配送ポリシー

注文を受領後、商品を安全にお届けするために努めます。配送詳細は確認メールに記載されます。ほとんどの場合、注文は2日以内に処理されます。特別な状況下では、以下のように遅れることがあります:土曜日、日曜日、または祝日に注文をした場合、2日遅れます。通常、飛行機の遅延やその他の環境要因の影響を受けない場合、5〜7営業日(月曜日から金曜日)かかります。私たちの配送サービスは世界中に及ぶため、配送時間はあなたの場所によって異なります。遠隔地や国の場合は数日かかる場合がありますので、お待ちください。

1. 返品・交換ポリシー

私たちはroymall.comで購入した商品のみ受け付けます。地元のディストリビューターや他の小売店で購入した商品は返品できません。 最終販売商品や無料ギフトは返品できません。返品の対象となるためには、商品は未使用で受け取ったときと同じ状態でなければなりません。また、元のパッケージに入っている必要があります。返品手順を受け取った後、返品商品をパッケージに詰めて地元の郵便局または別の宅配業者に渡してください。
返品または交換商品を受け取った後、3〜5営業日以内に処理します。返金は自動的に元の支払い方法に反映されます。カスタムサイズ、カスタムカラー、カスタムプリントなどのカスタム製品は返品または交換できません。さらにヘルプが必要な場合は、お問い合わせください。 service@roymall.com またはWhatsapp: +8619359849471

2.返金ポリシー

返品パッケージを受け取り、確認した後、全額返金または100%ストアクレジットを受け取ります。返金は自動的に元の支払い方法に反映されます。 配送料や関税、手数料は返金対象外です。パッケージが発送された後、追加の配送料は返金できません。これらの費用を支払う責任があり、私たちはそれらを免除または返金することはできません。返品商品を受け取り、確認した後、返品商品を受け取ったことを通知するメールを送信します。また、返金の承認または拒否についても通知します。返金プロセスに関する問題がある場合は、お問い合わせください。 service@roymall.com またはWhatsapp: +8619359849471

Feature:



Chip: FT232RL

Draw out all signal port of FT232RL chip

RXD / TXD transceiver communication indicator

USB power supply, can choose 5V or 3.3V, set by jumper

With over current protection, using 500mA self-restore fuse

Pin definition: DTR, RXD, TX, VCC, CTS, GND

Pitch: 2.54mm

Size: 36 x 18mm (L x W)


Interface: Mini USB



Note:



This chip is not orignal, do not have EEPROM, can not invert the signals.



Package included:



1 x FT232RL USB to serial converter module


Paypalで購入
Electronics Ranking

Geekcreit? FT232RL FTDI USB - TTLシリアル変換アダプタモジュール Geekcreit for Arduinno - 公式Arduinnoボードで動作する製品

Geekcreit? FT232RL FTDI USB - TTLシリアル変換アダプタモジュール Geekcreit for Arduinno - 公式Arduinnoボードで動作する製品

Geekcreit? FT232RL FTDI USB - TTLシリアル変換アダプタモジュール Geekcreit for Arduinno - 公式Arduinnoボードで動作する製品

Geekcreit? FT232RL FTDI USB - TTLシリアル変換アダプタモジュール Geekcreit for Arduinno - 公式Arduinnoボードで動作する製品

Geekcreit? FT232RL FTDI USB - TTLシリアル変換アダプタモジュール Geekcreit for Arduinno - 公式Arduinnoボードで動作する製品

Geekcreit? FT232RL FTDI USB - TTLシリアル変換アダプタモジュール Geekcreit for Arduinno - 公式Arduinnoボードで動作する製品

Geekcreit? FT232RL FTDI USB - TTLシリアル変換アダプタモジュール Geekcreit for Arduinno - 公式Arduinnoボードで動作する製品

Geekcreit? FT232RL FTDI USB - TTLシリアル変換アダプタモジュール Geekcreit for Arduinno - 公式Arduinnoボードで動作する製品

Customer Reviews

4.90 out of 5
See all 3180 reviews
Write a Review
  • All Reviews (3180)
  • Image ( 2 )
  • Video (0)
  • All Star
    • All Star(3180)
    • 5 Star (2)
    • 4 Star (0)
    • 3 Star (0)
    • 2 Star (0)
    • 1 Star (0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 07/01/2017

    This module works nice.
    I add a picture with pin labels

    Comments (0)
    Show Original
  • 14/01/2017

    I buyed this product because i want to program 328 atmega uc`s, without including arduino board.
    First, i thought it was broked. I tried 2 days a lot of things, but everytime i couldn`t upload the arduino sketch. Them i saw a schematic on google, where betweem PIN 1 (RESET) and VCC (from atmega 329p) was a 220 resistor; i tried that and now it worls fine.
    THX!!!
    5/5

    Comments (0)
    Show Original
Show:
    12...30

    Total 0 pages

    Go to page

    Go
    Customer Q&As
    Can't find your answer? Ask a new questionorCustomer Service

    Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.

    showing 1-18 of 18 |
    Show Original

    A part of the QA has been auto-translated.

    • 0
      Q: My Windows7 computer doesn't recognize it, even with the drivers ...
      A:
      Attention au fonctionnement hardware. Il m'était impossible de connecter sur Windows 7 ce FTDI FT232RL. Je pensais à un problème de driver. J'ai passé des heures à tout essayer. En désespoir, j'ai pris une autre carte du lot de 5 que j'avais acheté. Miracle, la recherche du driver sur Windows Update a fonctionné. Le driver chargé, confirmé par un port COM sur Arduino IDE, j'ai essayé les trois autres cartes. Deux ont fonctionné, une était défectueuse. Au total, sur 5 achetées, 3 OK et 2 NOK avec le message "l'un des périphériques USB relié à cet ordinateur a mal fonctionné et Windows ne le reconnait pas". Alors évidemment, c'est pas trop grave vu le coût. Mais ça gonfle un peu quand même. Faites gaffe.
      Answered by francoisvexler on 25/09/2020Helpful (0)
    • 0
      Q: is this a genuine FTDI chip?
      A:
      not genuine
      Answered by WiniTang on 28/01/2019Helpful (0)
    • 0
      Q: genuine fdi chip
      A:
      This chip is not orignal, do not have EEPROM, can not invert the signals.
      Answered by Kahunarant7541 on 31/12/2018Helpful (0)
    • 0
      Q: I cannot get this (I have two of them) to work with Windows 10. (It worked with Windows 7 but I have bought a new Win10 PC.) Can you help?
      A:
      Sorry,I can't.
      Answered by auripes on 07/08/2019Helpful (0)
    • 0
      Q: Arduino -> Tools -> Programmer -> WHICH one ?? Thank you
      A:
      justchoose your arduino card and plug your FT232 to your arduino like this (i use an esp32 but it s quite the same): ARDUINO ---- FT232 GND ---- GND TX0 ---- RX0 RX0 ---- TX0 (VIN ----- VCC) Take care of your voltage but aware of 3.3V or 5V. I prefer to put an USB to my arduino-ESP32 card if possible the intensity provided by FT232 seems to be too low sometimes.
      Answered by BG384318105 on 23/03/2021Helpful (0)
    • 0
      Q: Are there any data sheets or pin outs? Thank You ahead of time. Mike
      A:
      Notsure, but probably.
      Answered by terazijel on 15/08/2022Helpful (0)
    • 0
      Q: Is there a schematic available for this device?
      A:
      ok
      Answered by Ferdinando73 on 02/02/2020Helpful (0)
    • 0
      Q: I can't use the device. My win10 doesen't recognize the product. I see this message: "unknown usb device". I tried the FTDIchip drive manual install, but it didn't work. Can you help me?
      A:
      while plugged in, go to the windows 10 settings and check for new updates. there will be a non-mandatory update called "ftdi driver"
      Answered by aron_raffaele on 27/09/2021Helpful (0)
    • 0
      Q: When loaded FDTI driver supplier's lastest version, the software changes PID and PID values to 0000 if the chip is not genuine. How can I solve the problem and run this board again. Thank you.
      A:
      FTDI was supposed to stop doing this after the last time they messed up the driver. If the driver has in fact modified your VID/PID you should be able to get a utility that will restore the PID VID. FTDI made the fix available after considerable customer backlash
      Answered by KevinSzabo on 14/04/2019Helpful (0)
    • 0
      Q: hello can this be used to flash a new firmware on a transmiter like flysky fs i6?
      A:
      i did it,it works
      Answered by vuninho on 14/03/2018Helpful (0)
    • 0
      Q: Is the socket for a mini type A or a mini type B cable?
      A:
      Mini Type B cable
      Answered by MrFrikkie on 31/01/2023Helpful (0)
    • 0
      Q: do you have cp2102 usb to uart
      A:
      No cp2102 chip
      Answered by KatyKaty on 22/09/2022Helpful (0)
    • 0
      Q: how can i power this board outside of the USB, as far as i checked, all the holes are outputs, and it seems that is nowhere a datasheet for this board?
      A:
      The board is self explanatory and is designed to be powered from the USB interface. It uses an FTDI FT232RL USB to UART chip with TTL levels on the serial interface. The datasheet for the chip is is available on the FTDI website.:- DS_FT232R.pdf. However, the board and chip does support being powered by a +3.3V to +5.25V supply on the "5V" hole for the device core. This is the Vcc pin of the chip. Now, the hole labelled "VCC" is connected to the VCCIO pin of the FTDI device and in the words of FTDI:- "+1.8V to +5.25V supply to the UART Interface and CBUS group pins (1...3, 5, 6, 9...14, 22, 23). In USB bus powered designs connect this pin to 3V3OUT pin to drive out at +3.3V levels, or connect to VCC to drive out at 5V CMOS level. This pin can also be supplied with an external +1.8V to +2.8V supply in order to drive outputs at lower levels. It should be noted that in this case this supply should originate from the same source as the supply to VCC. This means that in bus powered designs a regulator which is supplied by the +5V on the USB bus should be used." Care may be required for supply isolation in your application.
      Answered by mk_glover on 28/11/2021Helpful (0)
    • 0
      Q: where to buy the dam usb cable for this ? from all the usb options that are out there,you chosed the oldest and worst of all,dang
      A:
      Usbstandards are wicket bad, it is not just you. Blame Apple mostly but all are guilty. More plugs, more money, it is wild. Anyway, this one is called usb mini, was "the" solution for all phones, until replaced because it was not flat enough.
      Answered by tommielauriks on 09/01/2022Helpful (0)
    • 0
      Q: Where can I find the correct driver for this device? I found many online that didn't work.
      A:
      Download AlienRc driver finder start it up and plug in this tool via USB cord. The driver finder software will find and download the proper software for this tool.
      Answered by Hobbyboy on 06/04/2021Helpful (0)
    • 0
      Q: can I use it for Mini OSD Module for APM PIX Pixhawk Pixhack Flight Control Board ? https://usa.banggood.com/Mini-OSD-Module-for-APM-PIX-Pixhawk-Pixhack-Flight-Control-Board-p-1082083.html?rmmds=search&cur_warehouse=CN
      A:
      Iwould recommend staying away from knock-off FTDI chip. Plan B: other serial converters are using other chips but FTDI and they won't give you the level of frustration FTDI drivers may give you (they've been known for bricking knock-off devices). Plan C: buy a genuine FTDI board from FTDI resellers but be ready to fork $$$.
      Answered by Treblig on 18/09/2020Helpful (0)
    • 0
      Q: Is there a driver for MAC OS? the device won't work with regular FTDI drivers, the mac does not recognize it. I guess is because is not genuine chip.
      A:
      Go to the ftdichip website. Add a dot com to the name of the chip. Go to support and find documents Under Documents search for install Guides for mac osx. Look for FT232. If the chip is genuine the mac driver listed there should work!
      Answered by gipsyblues on 04/05/2020Helpful (0)
    • 0
      Q: Does this come with USB mini or USB micro port?
      A:
      MIni
      Answered by dvfarm on 13/08/2019Helpful (0)

    マイカート カート (0)
    マイお気に入り マイお気に入り (0)

    Roymall Service