Specifications:

Model: 1:64 End-Fed Antenna
Bands: 4-band and 8-band (supports frequencies from 1MHz to 30MHz)
Supported Modes: SSB (<100W), CW (<100W), Data Transmission (FT8/FM/AM/PSK, <60W)
Input Impedance: 50Ω
Magnetic Ring Dimensions: Outer Diameter 39mm, Inner Dimensions 20mm x 17mm
Dimensions: Length: 11cm, Width: 7cm, Height: 3.5cm



Features:

1.Wide Frequency Compatibility: Operates across a broad spectrum from 1MHz to 30MHz, supporting multiple bands for versatile applications like SSB, FT8, FM, and CW.
2.Compact and Lightweight Design: With dimensions of 11 x 7 x 3.5 cm, the antenna is easy to handle, store, and install without requiring tools.
3.Efficient Impedance Converter: Features a 1:64 impedance conversion system to optimize signal transmission and ensure seamless performance across diverse frequencies.
4.High Power Tolerance: Supports a power capacity of up to 100W for SSB and CW, and up to 60W for data modes like FT8, ensuring reliable performance during transmission.
5.Multi-Directional Usage: Designed for outdoor applications, this antenna is flexible and suitable for multi-directional use, enhancing usability in varied conditions.



Package Included:

1 x Professional End Fed Antenna

Note:
1:64 or 1:49 For the 4-band and 8-band end-fed antennas in the Barron systemyou need to provide your own wires ranging from 1.5 to 2.5 square inchesFor the 4-band, you will need 20 meters, and for the 8-band, 40.8 meters. Trim the antennas to the appropriate length using the antenna trimmer andfollow the instructions for installation and use.

Installation Requirements:
Due to its multi-directionality, when installing theantenna,only open and unobstructed areas need to be selectedThere is no need to consider the direction issue. Non-metallic ropes must beused at both ends of the antenna, and metal wire ropes are not allowed.Otherwise, it will affect the performance of the antenna. Within the coveragearea of the antenna, it must be at least 3 meters away from obstacles(includingwalls,trees,leaves,and non-metallic materials).Ifencountering metal objects (such as wires, windows, railings, etc.),it must be at least 5 meters away to achieve the ideal state. lt is best to installit at a high position and can be pulled horizontally,vertically, or diagonally.