1.You can contact the customer service. for any question regarding the product.
2.Ask the question in English to get answer faster.
3.Keep your question short and to the point.
安全なチェックアウト

| Model | 120A |
| Cont./Burst Current | 120A / 600A |
| Suitable Car | 1/8 RC Car |
| Suitable Brushless Motor | ≥ 3.5T |
| Resistance | 0.00035ohm |
| Battery | 2~6 Cells Lipo 4~18 Cells NiMH |
| BEC Output | 6.1V/3A (Switch Mode) |
| Dimension | 41*51*36mm |
,
,
,
,
,
,
,
,
,
,
A part of the review has been auto-translated.
Dropped this in my Traxxas Summit with a 20t pinion. Been running 4s (2x 2s Maxamps 6500mah 150c). I did 5 back to back speed runs with some heavy braking at the end of the runs(front flips at 100% force) and raced around a parking lot for maybe 10min. Esc was almost cool to the touch, very impressed, motor was a little warm to the touch. Confident I could run 6s, probably all day on the esc. I do recommend you get the programming card, brake force is weak at the default setting.
EXCELLENT VALUE!!
I used this combo to convert my Hyper 7 to brushless. On 4s lipo with a 16t pinion the top speed is 44mph as seen in the photo. Motor temps are around 130 deg F and esc stays very cool.
I used an Integy Hyper 8 brushless conversion kit which I had to slightly modify by drilling additional holes and enlarging the bearing carriers to get to fit the Hyper 7.
If I have problems with the motor, I'll try the slightly longer 4076 as there is plenty of room in the Hyper 7.
I've only had it for less than a week but so far, I couldnt be more pleased with the price and performance. Also, I believe shipping took around a week.
I highly recommended this combo for 1/8 scale 4x4 buggies!!
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
A part of the QA has been auto-translated.
0 Liked カートに追加されました
0 Liked カートに追加されました